How to install air compression horn

If the compressor works, then the problem is either the wiring or the air line has been blocked. Problem description: After a very long-term use, grease may clog up in the air compressor and it starts blocking the air flow.

Solution: Pour machine oil into the air compressor through the air tube, then honk the horn until all grease gets blown out from the compressor. Remember me Log in. Lost your password? In order to minimize voltage loss, make wires as short as you can. To get the loudest results, please use wiring that can support A of current.

In order to reduce airflow related problems, we recommend making the air line as short as you can. Keep the compressor away from direct contact with engine and other motorcycle components that produce a lot of heat. How to install, basics Bolt the air compressor and horn to the desired mounting spot. Suggestion: Install horn trumpet slightly downwards — this prevents water accumulating in it. Do the wiring. There are 2 ways to do the electrical wiring, explained below.

Connect the air compressor and horn by using the provided air line. Air line is replaceable inner diameter: 0. You can use any wire size:. For main wiring, wire each horn separately with their own 12 AWG wire and a relay. Each compressor needs its own 12 gauge wire for 20A of current. Do not let water get directly into the horn while washing your vehicle.

If it did, do not use your horn and let it dry out. Suggestion: when installing the horn, tilt it downwards to prevent this from happening. Remember: professional work is always better and safer than doing it on your own, if there is anything wrong with it, we recommend using professional service.

How to maintain your horn:. Problem description: After a very long-term use, grease may clog up in the air compressor and it starts blocking the air flow. Solution: Pour machine oil into the air compressor through the air tube, then honk the horn until all grease gets blown out from the compressor.

Solution: Test out the compressor straight on a battery with some 12 gauge wire. If the compressor works, then the problem is either the wiring or the air line has been blocked. Q — General F. Q — Shipping F. Remember me Log in.

We have an Onboard Air System for any pneumatic need you might have! To learn more which kit is right for you, see our previous blog about Choosing the Right Onboard Air System. Please leave this field empty. Take a look at our installation video or follow along with the step-by-step instructions below: NOTE : The installation instructions in this video are only applicable to single-compressor onboard air systems Part Numbers: , , , , and Step One: Choose the Location to Mount your Compressor Compressor can be mounted outside the vehicle if you have room for it we suggest relocating the filter if do.

Choose angle of compressor mount: right side up, sideways, or upside down although VIAIR recommends mounting upright to keep longevity of the compressor and to avoid overheating.